← All articles

Groupage or full truckload: which to choose

A forklift is parked in front of a truck

Groupage or full truckload? If you choose wrong, you either pay for empty space in a whole truck or the goods arrive after the deadline you promised your customer. In this article you will find a simple rule, based on pallet count, weight and deadline, so you can request the right vehicle from the start.

Full truckload (FTL): the whole truck just for your goods

With full truckload transport (FTL) you get a 13.6 m semi-trailer, curtainsider or box. The truck loads at your site and goes straight to the destination. It doesn't stop for other customers and there is no transshipment.

A 13.6 m semi-trailer takes up to 24 t or 33 Euro pallets (1.2 × 0.8 m). If you work with industrial pallets (1.2 × 1 m), 26 fit, in a single layer.

What you actually get with an FTL run:

  • departure directly from your warehouse, factory or site;
  • no transshipment and no extra handling;
  • a loading time agreed with you;
  • same-day or next-day delivery within Romania;
  • a coordinator who follows the run until delivery.

Keep one important thing in mind, though. With FTL you pay for the whole truck, not the space you use. If you only have a few pallets, you also pay for the space left empty.

Pallet groupage: you pay only for the space you use

With pallet groupage, your goods travel together with those of other shippers on the same route. The groupage truck collects goods from several customers heading in the same direction. That way you pay less than for a whole truck.

How the price is calculated: the loading metre

The price is set per loading metre or per pallet. The loading metre (ldm) is the length of floor taken up in the truck, across its full width. A Euro pallet takes 0.4 ldm, an industrial pallet 0.5 ldm, and a full truck has 13.6 ldm.

Here are a few examples, for pallets placed in a single layer:

Goods Space taken
1 Euro pallet 0.4 ldm
5 Euro pallets 2 ldm
10 Euro pallets 4 ldm
6 industrial pallets 3 ldm
12 industrial pallets 6 ldm
Loading metres taken in the truck
Loading metres taken in the truck
1 Euro pallet0.4 ldm
5 Euro pallets2 ldm
10 Euro pallets4 ldm
6 industrial pallets3 ldm
12 industrial pallets6 ldm
Full truck13.6 ldm

Deadline and weight

The transit time for groupage is 1–3 working days. It is a bit more flexible, because the truck makes several stops. Sometimes the goods also pass through a consolidation warehouse before delivery.

For very heavy pallets, weight matters too. If the goods weigh a lot in little space, the price is based on kilograms, not loading metres.

The 3.5 t express van: for small loads that can't wait

Sometimes you don't have much to move, but you're in a real hurry. That's where the 3.5 t express van comes in. It leaves just for you and goes straight to the destination, with no stops for other customers.

A van carries roughly 1–1.3 t and between 4 and 10 Euro pallets. A closed panel van takes 4–5 Euro pallets, and a curtainsider van up to 10 Euro pallets. If you order in the morning, the van can leave the same day.

The express van is a good fit when:

  • a production line is stopped because of one part;
  • you have samples or goods for an event, with a fixed delivery time;
  • you have small but urgent orders;
  • you deliver to city centres, where large trucks have restricted access.

Groupage or full truckload: the criteria for choosing

To decide quickly, look at four things: volume, weight, deadline and fragility. The table below puts the three options side by side.

Criterion Full truckload (FTL) Pallet groupage 3.5 t express van
Volume up to 33 Euro pallets, 13.6 ldm from 1 pallet to part loads 4–10 Euro pallets
Weight up to 24 t very heavy pallets are charged by kilograms approx. 1–1.3 t
Deadline same day or next day within Romania 1–3 working days same-day departure, if you order in the morning
Handling no transshipment several stops, sometimes a consolidation warehouse direct, no other customers
How you pay the whole truck the space you use the van leaves just for you

The simple rule

  • Full truckload: worth it when you have at least half a truck of goods. Also choose it when you don't want the goods unloaded along the way, for example if they are fragile.
  • Groupage: suitable for a few loading metres of goods and a flexible deadline.
  • Express van: for small emergencies that can't wait for groupage.

Two situations change the calculation. Pallets that can't be stacked in practice also take up the space above them. And a very heavy pallet, or one taller than 1.8 m, can't be taken by just any groupage truck.

Let's take a hypothetical example: you have 10 non-stackable Euro pallets and delivery can wait two days. They take 4 ldm, so groupage costs you only the space used. But if you have 18 fragile Euro pallets, that's more than half the truck and FTL becomes the logical choice.

What to tell us in your request to get the right vehicle

The more complete the request, the more accurate the quote. Tell us from the start:

  • the number and type of pallets (Euro or industrial);
  • the height and weight of each pallet;
  • whether the pallets can be stacked;
  • where the goods are going from and to;
  • the delivery deadline you need.

For groupage, prepare your pallets well. Use undamaged pallets, and don't let the goods overhang their edges. Stretch-wrap the goods and secure them to the pallet.

Stick a label on each pallet with the consignee, their phone number and the number of packages. Note the real height and weight, so there are no differences at invoicing.

How we work: from request to confirmed delivery

We are a freight forwarder, so you have a single partner from quote to delivery. We work with vetted carriers, with a transport licence and CMR insurance. We look for the free truck closest to the loading point, so we find the right vehicle faster.

The process has four steps:

  1. You send the request with the goods, the route and the deadline.
  2. You get the quote with the price and the vehicle within 30 minutes at most, during working hours, Mon–Fri, 09:00–17:30.
  3. We organise the transport with the right carrier.
  4. Delivery is confirmed with the CMR signed by the consignee.

Not sure yet whether you need groupage, a full truck or a van? Tell us what you need to move and we'll help you choose. Request a quote or call +40 731 095 863.

Frequently asked questions

From how many pallets is a full truck worth it instead of groupage?

A full truck is worth it when you have at least half a truck of goods. A 13.6 m semi-trailer takes 33 Euro pallets, so the threshold is around half of that capacity.

How is the price calculated for pallet groupage?

You pay only for the space you use, per loading metre or per pallet. A Euro pallet takes 0.4 ldm and an industrial pallet 0.5 ldm. For very heavy pallets, the price is based on kilograms.

How long does groupage transport take in Romania?

The transit time for groupage is 1–3 working days, because the truck makes several stops and the goods sometimes pass through a consolidation warehouse.

When should I choose the 3.5 t express van?

Choose the express van for small, urgent loads, for example a part that is stopping a production line. The van carries roughly 1–1.3 t and 4–10 Euro pallets and goes straight to the destination.

What if my pallets can't be stacked?

Tell us from the start, because pallets that can't be stacked in practice also take up the space above them. This changes the calculation and sometimes the right vehicle too.

  • full truckload
  • pallet groupage
  • express van
  • B2B logistics

Written with the help of AI and reviewed by our team.